If your Viking range igniter won’t spark, it can be a frustrating experience, especially when you’re in the middle of preparing a meal. Igniters are essential to gas ranges as they produce a spark that ignites the gas from the burner. This article will discuss some troubleshooting tips to help you get your Viking range igniter to work again.
Understanding the Ignition System of a Viking Range
Before we delve into the troubleshooting tips, let’s first understand how the Viking range ignition system works. The Viking range uses a spark ignition system that generates a spark to ignite the gas flowing from the burner. The spark is produced by an igniter, a small device that creates an electrical arc between two electrodes. When the electrical arc heats up, it produces a spark that ignites the gas from the burner.
The ignition system of a Viking range consists of several components, including the igniter, the burner, the control module, and the wiring. If any of these components are faulty or malfunctioning, the igniter may not spark, causing the range to fail to light up.
Viking Range Igniter Not Working? Here’s What to Do
Here are some troubleshooting tips to help you diagnose and fix the issue of your Viking range igniter not sparking:
Check the Power Source
If your Viking range igniter won’t spark, there might be an issue with the power source. Here’s what you can do to check it:
- Ensure the power cord is properly plugged in.
- Check if the circuit breaker is turned on.
- If the range is not getting power, the igniter will not spark.
Clean the Igniter and Burner
Over time, the igniter and burner of your Viking range can become dirty and clogged, affecting their performance. If the igniter and burner are dirty, they may not produce a spark or be strong enough to ignite the gas. To clean the igniter and burner:
- Turn off the range and disconnect it from the power source.
- Remove the grates and burner caps, and clean the igniter and burner with a soft brush and soapy water.
- Dry them thoroughly before reconnecting the range to the power source.
Check the Wiring
Loose or damaged wiring can prevent the igniter from sparking. To check the wiring, you should follow these steps:
- Turn off the power to the range and unplug it or turn off the circuit breaker.
- Inspect wiring connections for loose or damaged wires.
- Replace or repair any loose or damaged wires as needed.
- Test the continuity of wiring connections with a multimeter.
- Reconnect the range to the power source and test the igniter. If it still doesn’t spark, consult a technician.
Replace the Igniter
If none of the above troubleshooting tips work, the igniter may be faulty and must be replaced. Here are the steps to follow:
- Turn off the range and disconnect it from the power source.
- Locate the igniter, which is usually located near the burner.
- Remove the igniter by unscrewing it from the burner.
- Disconnect the wiring from the old igniter.
- Install the new igniter by connecting the wiring and screwing it into the burner.
- Reconnect the range to the power source and test if the igniter is sparking.
Faulty Spark Module
A faulty spark module is another possible cause of a Viking range igniter won’t spark. The spark module generates the electrical spark that ignites the gas in the burner. If the spark module is faulty, it may not be able to produce a spark, or the spark may be too weak to ignite the gas. To troubleshoot a faulty spark module, you can try the following:
- Check the spark module for damage or corrosion.
- Test the spark module with a multimeter to see if it’s faulty.
- Check electrode and wire connections to ensure they are tight and undamaged.
A Viking range igniter not sparking can be a frustrating experience, but with these troubleshooting tips, you can diagnose and fix the problem. Always turn off the range and disconnect it from the power source before attempting any repairs. If you’re uncomfortable performing the repairs yourself, it’s best to search for a professional Viking range repair near me.
Need Professional Help? Contact Viking Professional Service!
If you’ve tried troubleshooting your Viking range igniter and it still isn’t working, it may be time to seek professional assistance. Our team at Viking Professional Service is experienced in providing quick and efficient Viking range repair, no matter how complex the issue is. We also guarantee the best Viking Oven Repair, Viking Stove Repair, Viking Rangetops Repair, and Viking Cooktop Repair in town! Contact us today to schedule your much-needed Viking range repair service appointment and get your appliance working like new again.