Are you bothered by a Viking cooktop that keeps clicking after lit? You’re not by yourself. A clicking noise during startup is normal for these cooktops. However, if the clicking doesn’t stop, it means there’s an issue. This is usually due to small problems in the ignition system. Knowing how the ignition system works can help you find and fix the problem better.
Understanding Your Viking Cooktop’s Ignition System
Your Viking cooktop uses an electric ignition system to light the gas burners. This system includes an igniter, a spark module, and wires that connect the parts. When you turn the burner knob, it sends a signal to the spark module. The spark module then sends a spark to the igniter. This spark ignites the gas from the burner, which creates the flame for cooking.
If you hear a constant clicking noise after the burner is lit, it means the ignition system is still trying to spark even though the flame is already there. There are several reasons this can occur, and we will discuss them in this guide. Knowing these reasons will help you fix the problem and try some DIY solutions.
Common Reasons for Continuous Clicking
One of the most common reasons for constant clicking is a dirty igniter. Grease, food bits, or dust can build up on the igniter. This keeps it from sparking correctly. Because of this, the spark module keeps sending sparks until the gas ignites.
Moisture can also be a problem around the igniter. This might happen if you just cleaned your cooktop and some water got into the burner area. It can also occur if you had a spill while cooking. The moisture messes with the electrical current from the igniter, which causes the clicking to continue.
Here are some common reasons for continuous clicking:
- Misaligned burner caps: If the burner cap is not in the right place, it can affect the ignition.
- Moisture around igniters: Water or dampness can hurt the igniter’s ability to spark.
- Clogged burner ports: A buildup of debris can block gas flow, causing ignition issues.
- Faulty spark module: A broken spark module may keep sending sparks even when it’s not needed.
Step-by-Step Troubleshooting Guide
If your Viking cooktop is still clicking after the burner lights, don’t worry. You can try a few simple steps before calling a professional. Most of these steps are just cleaning and adjusting things yourself.
Checking for Misaligned Burner Caps
A misaligned burner cap is often the main reason for a clicking cooktop. The cap helps control the gas flow to the igniter. When it’s not aligned correctly, it can cause problems, making it hard for the igniter to create a spark and light the burner.
To check if the cap is misaligned, start with a cool cooktop. Lift the burner cap gently and look at its position. Make sure it sits evenly on the burner base. The slots should line up with the igniter and gas ports.
If you find any misalignment, just move the burner cap back into place. Make sure it is flat and secure on the base. This small change might stop the clicking noise.
Inspecting for Moisture Around Igniters
Moisture can be a big problem for electrical parts, and the igniter on your cooktop is no different. Even just a little moisture can affect the spark and keep the clicking sound going.
First, make sure the burner caps are in the right position. Then, check around the igniters for any moisture. Look for water droplets, condensation, or anything that seems wet. If you see moisture, let it dry completely. For the igniter to work well again, it needs to be dry.
You can help dry it faster by using a hair dryer on a low setting or by gently patting the area with a dry cloth. Be careful not to use too much heat, as this could harm the igniter. Keep in mind, making sure the igniter area is dry is vital to fix the clicking issue.
DIY Fixes for a Clicking Viking Cooktop
Often, cleaning and small adjustments can fix the clicking sound. Cleaning the ignition system and checking the burner caps can usually solve the problem. But, before you start cleaning, always unplug your cooktop to stay safe.
If your Viking cooktop still clicks after you try these easy fixes, there may be a bigger problem. Damaged igniters or a faulty spark module require a professional to repair or replace them. This is important to keep your appliance working safely and well.
How to Clean the Ignition System
Over time, grease, food bits, and other mess can build up on the ignition parts. This can block the spark. Cleaning these parts now and then can stop this buildup and help them work well.
Start by turning off the gas to the cooktop. Let it cool down fully. Then take off the burner caps and grates carefully. Use a soft brush or an old toothbrush to clean gently around the igniters and burner spots. Don’t use strong chemicals or rough cleaners, as they might harm the ignition parts.
After you clean, wipe away any leftover bits or water with a dry cloth. Let the ignition system dry completely before putting the burner caps and grates back on. Cleaning your Viking cooktop’s ignition system regularly can stop clicking issues and keep it working safely and efficiently.
Adjusting Burner Caps Correctly
As mentioned before, a misaligned burner cap can cause your Viking cooktop to make a clicking noise. It’s important to make sure the caps are in the right place for it to work well.
First, find the correct spot for the burner cap by checking for any marks or guides on the burner base. Typically, there are notches or grooves that match the shape of the burner cap. This will help you align it correctly.
Next, place the burner cap over the burner base. Make sure the igniter fits into the opening on the cap. Press down firmly so the cap stays secure and flat on the base. Getting this positioning right will help with gas flow and ignition. This can stop any further clicking problems.
Contact Us at Viking Professional Service
If you have tried all the troubleshooting steps and your Viking cooktop still clicks, reach out to the experts at Viking Professional Service. Our skilled technicians know a lot about fixing Viking appliances. They can quickly solve your cooktop issue. We know how annoying a broken appliance can be. That’s why we work hard to offer quick and efficient service. Contact us today to set up a service appointment. Let our technicians get your Viking cooktop working like new again.
Conclusion
In conclusion, taking care of your Viking cooktop is very important. It helps avoid problems like the Viking cooktop keeps clicking after lit. To fix these issues, you need to understand the ignition system. Cleaning your cooktop regularly and adjusting the burner caps can get rid of the clicking noise. For more tips on maintenance and care, visit our blog about Mastering Viking Cooktop Safety Tips for Maintenance. A well-kept cooktop makes cooking safe and efficient.
Frequently Asked Questions
Why does my Viking cooktop click even after it’s lit?
A Viking stove keeps clicking sound when lit may be due to issues with the ignition system. This could be caused by a dirty or wet igniter, misaligned burner cap, or other factors affecting flame detection.
Can moisture be the reason for my cooktop’s continuous clicking?
Yes, moisture can make your appliance click again and again. If the igniter is wet, it can’t create a strong spark. This leads to more clicking as the appliance tries to light the gas.
How often should I clean my Viking cooktop’s ignition system?
It’s a good idea to clean the ignition system of your Viking cooktop. This includes the igniters and the areas around them. You should do this at least once a month. Cleaning helps stop grease and dirt from building up. If too much builds up, it can cause problems with how the cooktop lights up.